Replacing Arm Rest Pads - Standard Model

 

Steps for Replacing the Arm Rest Pads on the EZ Lite Cruiser Standard Model

Flip the arm rests up, by pushing the latch under the arm rest up, which will all you to raise them.

Use a screw driver to remove the two bolts that hold the arm rest pad on to the frame.  One is located at the back of the arm rest pad, and one at the front of it.

Next, take your new arm rest pad, place it on to the frame, insert the first bolt, and begin to screw it in, first by hand and then with the screwdriver.

Then, do the exact same for the second bolt.

Lastly, place the arm rest back down.